https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm²,
AWG: 26 - 10, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Product Features
■
■
The consistent labeling and bridging of terminal blocks is an advantage
Feed-through terminal block enables terminal strips of the same shape to be configured with disconnect and knife disconnect terminal blocks
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
Weight per Piece (excluding packing)
11.476 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
2
Nominal cross section
4 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
04/29/2016 Page 1 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Technical data
General
Maximum load current
41 A (with 6 mm² conductor cross section)
Nominal current IN
32 A
Nominal voltage UN
800 V
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
4 mm² / 0.9 kg
2
6 mm / 1.4 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.14 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
1N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
04/29/2016 Page 2 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Technical data
General
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 120 °C
Dimensions
Width
6.2 mm
End cover width
2.2 mm
Length
57.8 mm
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Connection data
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
10
04/29/2016 Page 3 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Technical data
Connection data
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Connection in acc. with standard
IEC/EN 60079‑7
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Stripping length
9 mm
Internal cylindrical gage
A4
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
04/29/2016 Page 4 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Classifications
eCl@ss
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / LR / GL / DNV / RS / IECEE CB Scheme / EAC / EAC / cULus
Recognized
Ex Approvals
IECEx / ATEX / UL Recognized / cUL Recognized / EAC Ex
Approvals submitted
Approval details
04/29/2016 Page 5 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Approvals
CSA
B
C
mm²/AWG/kcmil
26-10
26-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
B
C
mm²/AWG/kcmil
26-10
26-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
UL Recognized
VDE Gutachten mit Fertigungsüberwachung
mm²/AWG/kcmil
0.2-4
Nominal voltage UN
800 V
cUL Recognized
B
C
mm²/AWG/kcmil
26-10
26-10
Nominal current IN
30 A
30 A
Nominal voltage UN
600 V
600 V
LR
GL
DNV
04/29/2016 Page 6 / 7
https://www.phoenixcontact.com/us/products/3046184
Feed-through terminal block - UT 4-MTD - 3046184
Approvals
RS
IECEE CB Scheme
mm²/AWG/kcmil
0.2-4
Nominal voltage UN
800 V
EAC
EAC
cULus Recognized
Drawings
Circuit diagram
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
04/29/2016 Page 7 / 7
很抱歉,暂时无法提供与“UT 4-MTD”相匹配的价格&库存,您可以联系我们找货
免费人工找货